Ideally, you open the package and immediately see: this fits. That’s most likely when you quickly lock in certainty on two things upfront: the model code and the match with your old part. The approach at Fixpart helps with that: you first search by the exact version of your appliance (using the model code) and then check with photos whether you truly have the same variant. That way, “looks similar” turns into “this is the one” much faster.
Start With The Model Code, Not The Name On The Front
Searching only by brand and appliance type (like “Bosch dishwasher” or “Samsung fridge”) often brings up multiple variants that look almost identical. With the model code, you zoom straight in on your exact version. That makes it much easier to find the right pump, hinge, or connector.
Copy the model code exactly, including hyphens and extra letters. Those details are often what separates one variant from another. If you also have a serial number, write that down too: it often helps identify the exact version within a model range.
With the correct model code, you’ll reach the parts that match the mounting and connections faster. And if something still doesn’t feel quite right (for example, a connector that seems mirrored, or a screw hole that’s just slightly different), the model code gives you a solid reference point to check whether you’re looking at the right variant.
Photos: How To Avoid The “Looks The Same” Trap
In product photos, parts can look identical very quickly. That’s exactly why photos are your best tool for comparing fixed reference points: the position of tabs, the thickness of an edge, the angle of a connector, or the location of a clip point. Put those side by side and you’ll often see quickly whether it truly matches.
Make it easy for yourself with a few clear photos of your old part:
- straight from the front
- at an angle from the side (for height and shape)
- close-ups of plugs, hose barbs, clip tabs, and screw holes
A photo with a tape measure provides extra confidence in dimensions such as length, diameter, or centre-to-centre distance. And is there a code on the part (stamp, sticker, or part number)? Take a sharp close-up of that, too, because it makes matching much more certain.
Photos are especially important for left/right variants. Think hinges, rails, and door handles: the difference is often in the position of the mounting point or the direction of a bend. By mirroring the shape and mounting points in the product photo, you’ll see more quickly which side you need and whether everything lines up neatly.
When To Push Ahead, And When It’s Better To Pause
Repairing is satisfying: your appliance works again, and you fixed it yourself. You’ll make the most progress when you know when you can push ahead, and when you first need a bit more clarity.
Pushing ahead makes sense once three things line up: the model code points to your exact version, the part visibly matches the connections and mounting, and you have a clear reason to replace this part. For example, a seal that looks hard or dried out, a filter that’s visibly warped, or play in a component where there shouldn’t be any.
Pausing is smarter if the complaint is still broad (like “it’s acting weird”) or if multiple parts seem suspicious. In that case, narrow the problem with a quick symptom check: sounds (ticking, humming, scraping), visible signs (water marks, cracks, discolouration), and location (a consistent leak spot, play on a shaft, a part that gets hot). If several options still remain after that, ruling things out step by step works better than guessing.
One Quick Check Before You Order
Do one last quick check on three points: connection (plug type or hose barb and its position), dimensions (especially for seals, hoses, and wheels), and mounting (number and position of screw holes or clip points). Do you see a revision or variant that looks different? Use the model code as your guide: with an exact match, you can judge more confidently whether the difference belongs to your version or whether you should look at another variant.
Want to choose with more confidence? With a model code and a few sharp photos of the old part (on a light background, including one with a tape measure), comparison becomes concrete, and ordering feels much less like a gamble.
